Lossless KVM OVER IP HDMI optical network extender uses CAT6/7 cable or optical fiber to transmit video, audio and KVM signals among multi- computer rooms/data centers. Video quality can be in desktop-class applications, and break through the limitation of transmission distance based TCP/IP protocol, Ensure lossless on vision, hear and control; Delay free experience, ensure the quality and efficiency of control.
Technical advantages
Lossless display without delay
The lossless KVM over IP HDMI optical network extender optimizes the image quality and transmission delay respectively based on the patented video compression algorithm, which can ensure the lossless display of the image and transmit with a delay less than 80us 1080p@60hz/4kx2k@30Hz HD Ultra HD real-time image, as if in the local direct connection viewing experience
Application topology:
Unicast Mode (one to one)
Multicast mode I (one to many)
Multicast mode II (multilayer network switching)
|
Video |
|
|
Signal Protocol |
HDMI1.4b、TMDS Signal |
|
Physical interface |
HDMI TYPE A |
|
Max Resolution |
4096x2160@30Hz（RGB444 format），4096x2160@60Hz（YUV420），2560x1080@120Hz （RGB444）， |
|
H D C P |
HDCP1.4 & HDCP2.2 |
|
Pixel bandwidth |
300MHz，all-digital |
|
Interface bandwidth |
12Gbps |
|
signal intensity |
TMDS +/-0.4Vpp |
|
Minimum maximum level |
TMDS 2.9V/3.3V |
|
Impedance |
Differential 100 ohm |
|
HDMI wire input distance |
Less than10m，Certified HDMI wire is recommended |
|
Audio Interface |
|
|
Audio Input |
3.5mm audio jack |
|
Audio output |
3.5mm audio jack |
|
Gain |
0dB |
|
frequency response |
20hz-20khz |
|
Signal type |
stereo |
|
impedance |
Input >10kohm; output 50 ohm |
|
Maximum input level |
3Vpp |
|
USB Interface |
|
|
Type |
Type B seat |
|
Signal Type |
USB Signal |
|
Agreement |
USB2.0 |
|
transmission speed |
480Mbps |
|
RS232 Interface |
|
|
Connector |
3.5mm phoenix jack |
|
Baud rate |
115200bps |
|
Signal Type |
Digital TTL |
|
Level type |
RS-232 level |
|
Signal direction |
Two way communication |
|
network interface |
|
|
Connector |
High speedRJ45 |
|
Protocol |
TCP/IP |
|
Transmission Distance |
use of CAT6/7 shielded wire can be more than 100 meters,Access switch without distance limit |
|
Transmission delay |
<80us |
|
Fiber Interface |
||
|
Connector |
SFP fiber connector, LC fiber |
|
|
Type |
Multimode or single mode |
|
|
Wavelength |
Multimode:850nm Singlemode: 1310nm |
|
|
Protocol |
TCP/IP |
|
|
Rate |
1.25Gbps |
|
|
Specifications |
Multimode: 50/125um Singlemode: 9/125um |
|
|
Transmission Distance |
Multimode less than 300m, Single mode:2km~80km |
|
|
Specifications |
||
|
Power |
12V/2A |
|
|
Power waste |
<=10W |
|
|
Temperature |
Working temp: 0~50 degree，Storage temp: 20~70 degree |
|
|
Humidity |
10%~90% |
|
|
Size |
13.5cm X 11cm X 3cm （L x W x H） |
|
|
Mean time between failures |
30000 hours |
|
|
Video Interface |
|
|
Signal protocol |
HDMI1.4b、TMDS Signal |
|
Physical interface |
HDMI TYPE A |
|
Max Resolution |
4kx2k@30Hz |
|
H D C P |
HDCP1.4 & HDCP2.2 |
|
Pixel bandwidth |
300MHz, all-digital |
|
Interface bandwidth |
12Gbps |
|
signal intensity |
TMDS +/-0.4Vpp |
|
Min max level |
TMDS 2.9V/3.3V |
|
Impedance |
Difference 100 ohm |
|
HDMI wore input distance |
Less than 10m, Certified HDMI wire is recommended |
|
Audio Interface |
|
|
MIC Input |
3.5mm Audio Jack |
|
Audio Output |
3.5mm Audio Jack |
|
Gain |
0dB |
|
frequency response |
20hz-20khz |
|
Signal Type |
Stereo |
|
Impedance |
Input >10k ohm; Output: 50 ohm |
|
Maximum Input Level |
3Vpp |
|
USB Interface |
|
|
Connector |
4 type a double deck seats |
|
Signal Type |
USB Signal |
|
Protocol |
USB2.0 |
|
Transmission Speed |
480Mbps |
|
Transmission Delay |
<80us |
|
RS232 Interface |
|
|
Connector |
3.5mm Phoenix Jack |
|
Baud Rate |
115200bps |
|
Signal Type |
Digital |
|
Level Type |
RS-232 Level |
|
Signal Direction |
Two way communication |
|
Network Interface |
|
|
Connector |
High speed RJ45 |
|
Protocol |
TCP/IP |
|
Transmission Distance |
Up to 100 meters with CAT6 shielded wire, Access switch without distance limit |
|
Fiber Interface |
||
|
Connector |
SFP fiber connector, LC fiber |
|
|
Type |
Multimode or Singlemode |
|
|
Wavelength |
Multimode: 850nm Singlemode: 1310nm |
|
|
Protocol |
TCP/IP |
|
|
Rate |
> 1.25Gbps |
|
|
Specification: |
Multimode: 50/125um Singlemode: 9/125um |
|
|
Transmission Distance |
Multimode: less than 300m; Singlemode: 2km~20km |
|
|
Specification |
||
|
Power |
12V/2A |
|
|
Power waste |
<=10W |
|
|
Temperature |
Working temp: 0~50 Degree, Storage temp: -20~70 degree |
|
|
Humidity |
10%~90% |
|
|
Size |
13.5cm X 11cm X 3cm （L x W x H） |
|
|
Mean time between failures |
30000 hours |
|
International Trade Department
Tel: +86-18260126091
Email: jean@lanbe.com
? 2018-2024 Beijing Lanbao Tianhe Technology Co., Ltd
LCD KVM Switch